Products
10 KV Arc Suppression Coil System
video
10 KV Arc Suppression Coil System

10 KV Arc Suppression Coil System

The NRXHXQ-10.5-1100/100-1000KVA arc suppression coil system is designed for 10 kV systems with a non-effectively earthed neutral. An earthing transformer provides the neutral point for the delta-connected system; a dry-type arc suppression coil compensates the capacitive earth-fault current of the network; and the NRXHXQKP control panel, built around the NRXHXQ-1-Z microprocessor controller, samples in real time and tunes automatically, keeping residual earth-fault current low. When a single-phase earth fault occurs, the arc self-extinguishes and the system can continue to operate with the fault present — fewer unplanned outages for substations, industrial plants and renewable-energy step-up substations.
Complete System, Front View


NRXHXQ01750x750

Twin Coils, Open Frame

Two dry-type coils side by side on blue-painted clamping frames, held by copper tie rods; busbars and

cooling fans in the upper compartment.

NRXHXQ02750x750

 

Single Cubicle, Door Open

Door opened through 90°, showing door-mounted devices and the unit inside in one view.

NRXHXQ03750x750

 

Outer Doors Open, Both Cubicles

Outer doors swung open; inner doors stay shut with their danger-live labels in view, showing the two-stage enclosure.

NRXHXQ04750x750

Control Board Wiring

Main switch, terminal blocks and temperature controller, with every core numbered.

NRXHXQ05750x750

Door-Mounted Components

Door-mounted 1-WK2 controller, 1-2HL and 1-1HL indicator lamps, and the 1-5AB component.

NRXHXQ06750x750

Fuse Bank and Voltage Transformer

Fuse bank on an insulated bar, voltage transformer and wall bushings under blue busbars, in a separately

serviceable upper compartment.

NRXHXQ07750x750

Inside the Transparent Guard

Transparent guard over the fuse bank and voltage transformer - visible, but out of reach.

NRXHXQ08750x750

Arc Suppression Coil Compartment

Single arc suppression coil in its own compartment, with inter-layer busbars and post insulators above.

NRXHXQ09750x750

Coil Bodies and Clamps

Cast-resin coil bodies, warning labels and clamping hardware.

NRXHXQ10750x750

Load Break Switch Mechanism

Spring operating mechanism, insulating rods and position indicator on a green frame.

NRXHXQ11750x750

NRXHXQKP Control Panel

NRXHXQKP control panel with two NRXHXQ-1-Z auto-tuning controllers and a keypad array.

NRXHXQ12750x750

Controller Cabinet Wiring

Protection relays, controllers and vertical terminal strips, wired in corrugated

conduit and labelled.

NRXHXQ13750x750

 

Hot Tags: 10 kv arc suppression coil system, China 10 kv arc suppression coil system manufacturers, suppliers, factory, power factor correction for battery storage, power factor correction for copiers, power factor correction for graphics cards, power factor correction for hvac systems, power factor correction for motors, power factor correction for replacements

Send Inquiry