Reactive Power Compensation Circuit - Reactive Power Generator

Dec 16, 2024 Leave a message

By utilizing PWM rectification control technology, the reactive power of the power grid is calculated through real-time sampling of voltage and current and high-performance DSP, achieving reactive power compensation. The characteristic of SVG is that it can achieve dynamic continuous reactive power compensation and compensate for inductive and capacitive reactive power, stabilizing the power factor of the power grid above 0.98. SVG not only compensates for reactive power, but also compensates for harmonic currents.

Reactive Power Compensation - Controller

Reactive Power Compensation Line - Switching Mode

Send Inquiry

High Voltage Series Reactor
High voltage series reactors are used in power systems below 0-63KV, connected in series with the system to suppress voltage waveform distortion in the power grid, thereby changing the voltage quality of the power grid and ensuring the safe operation of the power system; Limit the short-circuit...
High Voltage Parallel Capacitor
Parallel capacitors are suitable for AC power systems with a frequency of 50Hz or 60Hz and a rated voltage of 1kV or above. This capacitor mainly provides reactive power for AC power systems at the power frequency, to improve the power factor of the grid, reduce losses, improve voltage quality,...
Neutral Point Grounding Resistor Cabinet
In the 6-35KV AC power grid of the power system, the neutral point of the grid can be grounded through methods such as ungrounded, arc suppression coil grounded, high resistance grounded, and low resistance grounded. In the power system (especially in urban power supply systems where cables are...