News

When the load of the power grid is inductive, such as electric motors, welding machines, etc., the current of the power grid lags behind the voltag...

A composite switch is a device that connects thyristors in parallel with relay contacts. However, composite switches use both thyristors and relays...

The delayed switching method is commonly known as the "static" compensation method. The purpose of delayed switching is to prevent too fr...

The on-site reactive power compensation capacity can be determined based on the following empirical formula: In equation Q ≤ U Ι 0: Q - Rea...

The three-phase power factor can be accurately calibrated by the following different means: Section 1: Adjusting Capacitance Capacitance calibratio...

Efficient power factor correction means using a series of measures to improve the power factor of the power supply system to a level close to 1. Po...

When choosing power factor correction (PFC), there are many considerations, including key factors such as load type, specific power factor requirem...

The core purpose of PFC (Power Factor Correction) is to adjust the ratio between the actual power and the actual apparent power at the input of the...

Whether to adopt power factor correction (PFC) depends on many factors, especially your energy consumption, the type of equipment used and the powe...

Power Factor Corrector (PFC) is dedicated to enhancing the power factor of the power system, making the power use process more efficient. As a key ...

The commonly used reactive power compensation methods in the power grid include: ① Centralized compensation: Install parallel capacitor banks in hi...

1. Compensating for reactive power can increase the proportional constant of active power in the power grid. 2. Reduce the design capacity of power...